Palomar Technologies to Exhibit at the 2015 International Microwave Symposium

Posted by Katie Finney on Tue, May 19, 2015

Carlsbad, CA – May 19, 2015 – Palomar Technologies, the world-leading provider of precision microelectronics and optoelectronic packaging systems, announced today they will be one of over 550 exhibitors at the International Microwave Symposium (IMS) at booth #2517 on May 19-21 in Phoenix, Arizona. IMS is “the premier annual international meeting for technologists involved in all aspects of microwave theory and practice”. IMS stated, “It is the synergy of the Exhibition in conjunction with the Technical Symposia that makes Microwave Week the premiere international gathering for everyone involved in technologies associated with RF, microwave, millimeter wave, and THz frequencies”.

Automated wire bonders were introduced in the early 1980s. At that time, the majority of interconnects were made using aluminum wire. As the need for high reliability increased, gold wire became more common. As package densities increased, wire interconnect bond pitches decreased. The initial solution to fine pitch was wedge bonding because the wedge tool design allows wires to be bonded in close proximity (side-to-side).9000_pic17_hi_res

The RF and microwave markets are characterized by lower volume and higher mix when compared to semiconductor packaging. This requires different levels of manual and automatic assembly process steps depending on product and manufacturing maturity. Suppliers can help customers through the various stages of manufacturing automation by providing manual, semi-automatic, and fully automatic islands and lines of equipment and process.

Although there is continued effort in the semiconductor packaging industry to reduce package size along with the never-ending pursuit of cost savings, there remain a significant number of applications requiring a wildly different set of capabilities for die and wire bonding.

wedge_emulation

Wedge vs. Ball Bonding

Download "RF, Microwave, and Optoelectronic Packaging Die and Wire Bonding Case Studies" to take a deeper look at varying die attach and wire bonding requirements for emerging applications in the RF and microwave markets. The paper discusses three case studies:

  1.     RF-SOE Product (High Accuracy Die Bond + Semi/Automatic Wire Bond)
  2.     Optoelectronic Printer Product (Ultra Accuracy Die Bond)
  3.     High Brightness LED Matrix Product (High Accuracy Die + Semi/Auto Chain Wire)

About Palomar Technologies:

Palomar Technologies, a former subsidiary of Hughes Aircraft, is the global leader of automated high-accuracy, large work area die attach and wire bond equipment and precision contract assembly services. Customers utilize the products, services and solutions from Palomar Technologies to meet their needs for optoelectronic packaging, complex hybrid assembly and micron-level component attachment. For more information, visit www.palomartechnologies.com.

Download these resources for more information:

RF, Microwave, and Optoelectronic Packaging Die and Wire Bonding Case Studies 9000 Data Sheet
RF, Microwave, and Optoelectronic Packaging Die and Wire Bonding Case Studies 9000 Wedge Bonder data sheet

 

 ----
Katie Finney
Marketing Specialist
Palomar Technologies, Inc.

Tags: RF Packaging, 8000i Wire Bonder, microwave applications, International Microwave Symposium (IMS), 9000 Wedge Bonder

High-Accuracy Processes for RF, Optoelectronics & Automotive Microelectronics Assembly

Posted by Palomar Technologies MarCom Team on Thu, Sep 06, 2012

Carlsbad, CA – September 6, 2012 – Palomar Technologies, the world-leading provider of precision microelectronics and optoelectronic packaging systems, today announced that lead engineers will be presenting three highly technical talks at the IMAPS 2012 conference, held September 11-13 at the San Diego Town & Country Convention Center. Palomar Technologies will exhibit in booth #322.

1. High-Reliability Component Attachment Process for <5μm Placement Accuracy
Speaker: Donald J. Beck

2. Mixed Attachment Technology Studies in RF & Optoelectronic Packages Requiring High-Accuracy Placement

Speaker: Daniel D. Evans, Jr.

3. Gold Ball Wire Bonding with Heated Tool for Automotive Microelectronics
Speaker: David J Rasmussen

The complete IMAPS session agenda is available online at http://www.imaps.org/programs/IMAPS2012.pdf.

Palomar Technologies has also collaborated with IMAPS to host an on-demand webcast on "High-Reliability Component Attachment Process for <5um Placement Accuracy". Palomar Technologies Assembly Services general manager originally presented the webcast live in mid-June. The complimentary webcast recording is available at http://www.imaps.org/webcasts/2012may_palomar.htm

Palomar Technologies is accepting meeting requests throughout the duration of IMAPS 2012. Requests may be submitted online at http://www.palomartechnologies.com/contact-us.

About Palomar Technologies
Palomar Technologies, a former subsidiary of Hughes Aircraft, is the global leader of automated high-accuracy, large work area die attach and wire bond equipment and precision contract assembly services. Customers utilize the products, services and solutions from Palomar Technologies to meet their needs for optoelectronic packaging, complex hybrid assembly and micron-level component attachment. For more information, visit www.palomartechnologies.com.

###

Tags: RF Packaging, gold ball bumping, optoelectronic packaging, gold ball bonder, eutectic soldering process, automated component placement systems, automated packaging systems, assembly and packaging, IMAPS, eutectic diagrams, eutectic tutorial, optoelectronic, RF devices